Loose cable kit covers 1.4 to 1.7 m2

Product Code: UFDLOOSE1.7MTR3100

Before ordering make sure your underfloor heating cable kit will cover no more than 90% of your floor area.

It is better to order slightly less than you need than have too much underfloor heating cable as the heating cables CAN NOT be cut or shortened in any way.

Underfloor heating loose cable kits contain the following:

A drum of underfloor heating cable 230V with a power of 10 watts per linear meters that covers 1.4 to 1.7 square meters

An underfloor heating Digital thermostat of your choice

Floor temperature probe and Conduit housing

Floor primer and Roller for applying primer

Cloth Tape for fixing underfloor heating cable to subfloor

Full detailed fitting Instructions with clear pictures

Coverage

Covers 1.4m2 @ 6cm spacing between cable loops = 165w/m2. 

Covers 1.5m2 @ 6.5cm spacing between cable loops = 150w/m2. 

Covers 1.7m2 @ 7.5cm spacing between cable loops = 130w/m2. 

total cable length 22.5m

total output 225w

Please see below for basic underfloor heating installation guidlines - or click here for details of our installation service.

Underfloor Heating Basic Installation Guide

Step 1 - First prepare the subfloor ensuring that it is free from dirt or debris

Step 2 - Prime the floor using primer contained in kit.

Step 3 - If using tile backer boards or XPS Premium boards, do so in accordance with seperate instructions provided, using flexi tile adhesive.

Step 4 - Check the underfloor heating with a multimeter to ensure resistance is correct

Step 5 - Begin rolling out the underfloor heating mat and cut as shown above when reaching the end of the room (not cutting the cable!)

Step 6 - Run the power lead from the start of the mat up to the thermostat position.

Step 7 - Install the floor probe between two underfloor heating cables

Step 8 - If possible covers the underfloor heating cables with self levelling compound

Please note a full set of color instructions is included with your underfloor heating kit, the above is a basic indication of installation procedures.

  Our underfloor heating cable is a series type underfloor heating cable with a twin conductor. Each underfloor heating cable has a cold lead of 3.0M on one side. The underfloor heating cable has a resistance heating wire covered with a primary insulation of fluoropolymer (teflon) then covered with metal shielding and final outer sheath of fluoropolymer . The final outer diameter of twin conductor cable is 3.2mm.

The Hot and Cold lead junctions are uniquely designed to make them 100% foolproof.

Standards :  Meets all test requirements of IEC 60335. 

Approvals : SEMKO certified.

Cost-effective : Underfloor heating provides heat where required, resulting in optimal heat utilization and minimal losses. 

Flexibility : Can be laid on any area, or any floor layout.

Comfort :  Close and uniform spacing of underfloor heating cables, associated with thermostat controls to select temperature requirements, provides higher comfort.

DIY : Underfloor heating Directs Do-It-Yourself kits with clear instruction manuals makes it very simple to install

Range :  A wide range of heat loads and sizes ensure suitability to all kinds of floorings.

How much does it cost?

As standard we include FREE NEXT WORKING DAY DELIVERY to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products (this does not include tiling materials) Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed with your order.

Delivery types available;

Standard delivery (FREE)
Next working day, before 9am (£25.00)
Next working day, before 10am (£10)

How long does it take?

Items ordered before 2pm on any business day (Monday - Friday) excluding Bank Holidays should be delivered next business day (excluding Saturday), anytime up to 6.00pm. The standard delivery charge does not guarantee next day delivery; however every effort is made by us & the couriers to achieve this goal. Orders taken on Friday after 2pm, Saturday or Sunday will be dispatched on Monday (excluding Bank Holidays) for delivery on Tuesday. Orders taken on Friday before 2pm will be dispatched on Friday for delivery on Monday (excluding Bank Holidays). However, We rely upon the services of third party couriers, and whilst we endeavour to always deliver in a timely manner there are unfortunately a few occasions when the couriers fail to deliver on the appointed day. This happens rarely, but because it does occur, albeit occasionally, we cannot be held responsible for the late delivery of an item, or any costs incured by customers tradesman unable to work, please ensure you have your materials before booking in any trades.

All our kits come with the market leading TR3100 as standard.  This class leading underfloor heating thermostat has proven to be extremely reliable and user friendly, the controls are very easy to use and accessible from the front panel, its modern design and proven reliability make this unit a favourite choice.

TECHNICAL INFO:  Stylish and slimline design - Blue back light illumination  - Switches upto 16 amps (3500 watts) 230v AC - Can be either an air only / floor only / Air & Floor 7 day programmable (each day can be set different) - 4 set points per day (2 comfort - 2 economy) - Manual overide and vacation mode

Dimensions: 87mm x 87mm x 13mm - Mounting: Flush mounted 35mm deep galvanised box (single socket) - 3 meter remote floor probe included. Load: 3500w - 230v - 50Hz

Or For only £9.99 upgrade to The Remote Control TR3100 in White or Silver colour

TECHNICAL INFO: As above but with fantastic remote control function. Comes with slimline modern and stylish remote control unit which can be used to program the thermostat and control the heating from across the room.

Or for £14.99 upgrade to The Market leading AUBE Digital Thermostat

This class leading underfloor heating thermostat has proven to be extremely reliable and user friendly, the controls are discretly hidden behind 2 side panels, its sleak design and proven reliability makes this unit a favourite choice for many installers worldwide.

TECHNICAL INFO : AUBE TH132-F  - Operating modes: Manual - Automatic with manual advance - standby.Programming: 2 x on / 2 x off settigs per day, 7 day, auto early start function.Set back facility: User can select two level temperature function. Memory: Protected memory with capacitor back-up, no battery required.Dimensions: 80mm x 80mm x 20mm Mounting: Flush mounted 35mm deep galvanised box (single socket). Max Load: 15amps (3450w) Floor version and Air + Floor version avaliable operating modes Weekday / Weekend programming.4 level temperature setting. 2 meter remote floor probe included. Load: 3500w - 230v - 50Hz resitive

Or for the Ultimate Upgrade at only £19.99 to our amazing Touchscreen Thermostats in White or Silver

 White  

Silver

The Heatmiser PRT-ETS Electric Floor Heating Thermostat - Our 230v Touchscreen, programmable room thermostat for electric floor heating. This really is one of the best looking and advanced thermostats available on the market today.

This model is so easy to program, you do not even need a manual!!!

Blue back-lit Touchscreen

Supplied with a 3 Meter Remote Floor Probe

Heating: Weekday/Weekend or 7 Day Programming (Selectable in Software) ,Holiday Function ,Hold Function

Automatic blue back-light (Turns off after 30 seconds) ,Flush mounting

°C / °F Selectable

Key Locking Facility

Frost protection with adjustable temperature setting.

Easily increase or decrease the required temperature

Supply: 230v ,Outputs: Volt free 16A Max

Dimensions:  110x100x17mm

Sensing Modes

Built in Air Sensor ,Remote Sensor

Floor Sensing Only

Built in Air and Floor Limiting Sensor ,Remote Air and Floor Limiting Sensor